MasterSeal M 689

Home
Products
MasterSeal
MasterSeal M 689

MasterSeal M 689

A HIGH ELASTIC, ULTRA-FAST CURING, SPRAY APPLIED 100% POLYUREA MEMBRANE FOR USE IN WATERPROOFING APPLICATIONS

DESCRIPTION

MasterSeal M 689 is a solvent free, two component waterproofing membrane. It is highly reactive and can only be applied by special two component hot spray equipment.

FIELDS OF APPLICATION

MasterSeal M 689 is used in a variety of waterproofing applications, especially where a high degree of chemical and mechanical resistance is required.

This includes:

Waste water treatment plants (urban and industrial), both in the inflow and outflow areas.
Sewage effluent pipelines.
Steel and concrete pipes.
Secondary containment bunds in chemical and petrochemical industries.

Additionally, MasterSeal M 689 can be applied on:

Flat and architectural roofs.
Horizontal and vertical substrates.
Internal and external areas.
Concrete, cementitious mortar or steel substrates.
Reinforced concrete to protect it against carbonation, chloride induced corrosion or chemical attack in industrial environments.

Contact your local Master Builders Solutions representative regarding any application required not mentioned here.

FEATURES AND BENEFITS

Spray delivered and ultra-fast curing: enables easy application to form a monolithic waterproofing membrane on simple and complex surfaces.

− Application to vertical surface without runs.

− Easy application to complicated details.

Rapid curing:

− Rain resistance after only 30seconds.
− Allows early serviceability.
− Fully trafficable after only 12 hours.

Continuous membrane:

monolithic – no laps, welds or seams

Excellent chemical resistance.
Waterproof and resistant to standing water.
Fully bonded tosubstrate:

can be applied to a wide range of substrates with the appropriate primer.

High water vapour permeability:

low risk of blistering.

High resistance to carbon dioxide diffusion:

Protects concrete from rebar corrosion.

High abrasion and impact resistance:

Withstand mechanical traffic.

High elasticity and crack bridging capability:

− Remains elastic at low temperatures; Tg approx. – 45°C

− High durability and protection with reduced cracking due to embrittlement

Thermoset – does not soften at high temperatures.

Downloads

MasterAir 3012 TDS

pdf (206,71 Kb)