MasterSeal TC 682

A fast and low temperature curing, clear polyaspartic topcoat with high mechanical and weather resistances

What is MasterSeal TC 682 and where is it used?

MasterSeal TC 682 is a two component, clear, fast and low temperature curing, UV-stable, non-yellowing, elastic top coat on broad casted coatings.

MasterSeal TC 682 has a glossy and color stable finish.

MasterSeal TC 682 is primarily intended as the top coat in use in balcony and access balcony coatings in combination with colored flakes.

MasterSeal TC 682 can also be used as primer on concrete with moisture content up to 6%.

MasterSeal TC 682 is a one component, wear resistant clear topcoat for protecting waterproofing membranes used in balconies

MasterSeal TC 682 is fast and low temperature curing.

MasterSeal TC 682 has excellent mechanical properties and hard wearing.

MasterSeal TC 682 is elastic and crack bridging.

Applied on exposed surfaces, MasterSeal TC 682 shows very good UV resistance and color stability.

Which are the benefits of MasterSeal TC 682 that you will enjoy?

The use of MasterSeal topcoats in waterproofing systems, protects the membrane from mechanical damages (especially wear and abrasion) and improves the aesthetical appearance of the finished system.

MasterSeal TC 682 improves the durability of the waterproofing system, protecting the membrane from the action of weather.

Masterseal TC 682 is quick hardening. Therefore it shows short „ready for traffic” times.

MasterSeal TC 682 has an attractive appearance and low dirty retention. Therefore it is easy to clean and maintain.

Fully certified solution according EN 1504 part 2 and EN 13813 that ensures consistency in performance.