Close

Login

Please login with your username and password.

Login

Can’t remember your accounts password?

Can't access your account?
Close

Select your language

This page is available in the following languages:

    Close

    Please select your location

    Sika

    ​MasterFinish RL 345

    DESCRIPTION

    MasterFinish RL 345 is a ready-to-use release agent which is non-toxic, non-irritant and can be easily degraded biologically in line with OECD 301 criteria.
    MasterFinish RL 345 has been specially formulated with value-added additives to give an easy and complete release of the concrete from the forms and a significantly improved quality of the concrete surface which is smooth, homogeneous and free of bug holes.

    FIELDS OF APPLICATION

    MasterFinish RL 345 may be applied on metal, polyester or plywood molds, where excellent surface finish and optimum release are required in precast industry. In addition to precast application, MasterFinish RL 345 can be also used for job-sites for excellent concrete surfaces.

    FEATURES and BENEFITS

    • Enables easy stripping of form and reduces cleaning of form by reducing adhesion between form and concrete.
    • Highly reduces holes and surface errors on concrete surface, enables obtaining aesthetic surfaces.
    • Easy to apply
    • Ready-to-use and no need to dilute with water
    • Unlike corrosive and abrasive solvent based release agents which shorten form life, MasterFinish RL 345 renews the form, avoids rust formation and extends form life.
    • Reduces form and labor cost
    • Helps to remove concrete residuals on the form and enables an easy cleaning.
    • Creates less bug holes on finished concrete surface than mineral oil based release agents
    • Environmentally friendly, 100% compatible with nature. In case of spillage, it will be decomposed in nature
    • in 20 days while mineral based oils have to be disposed of.
    • It is safe and eliminates many health and environmental risks as compared to the traditional form release agents based on mineral oils and thus can be used with the maximum confidence by the workers on the job site.
    • Having a high flash point, any possible fire threats are avoided in warehouses
    • Having a low viscosity, application with a pump is easier and treatment dosage is low.
    • Having no volatile components enables to benefit from lubrication effect even at the later applications​

    ​