MasterEmaco ADH 610
Fast curing acrylic adhesive
How does MasterEmaco ADH 610 work?
MasterEmaco ADH 610 is a two-component styrene free, acrylic resin used for anchoring and dowel applications in uncracked concrete using threaded rod and rebar. It may be used at temperatures between 15 to 95 °F (-9 to 35 °C).
Recommended uses:
- Adhering dowel bars and tie bars for full depth concrete repairs
- Short term tensile anchoring and shear loading conditions in accordance with allowable stress design (ASD)
- Wide service temperature range between -40° to 176 °F (-40 to 80 °C)
- Moisture insensitive, allowing installation and curing in damp and water-saturated environments
- Bonding agent for fresh concrete to hardened concrete and hardened concrete to hardened concrete
What are the unique features of MasterEmaco ADH 610?
- 30-minute full cure at 77 °F (25 °C) in dry concrete
- Fast mortar repair for panels and other concrete surfaces
- High bond strengths
- Easily dispensable even at low temperatures
- Styrene free
- Non-sag
What are the benefits of MasterEmaco ADH 610?
- High bond strengths, wide service temperature range and moisture resistant (install and cure in water saturated environments.
- Bonding agent for fresh concrete to hardened concrete and hardened concrete to hardened concrete.
- Short term tensile anchoring and shear loading conditions in accordance with allowable stress design (ASD)
Direct contact
Related Literature
MasterEmaco ADH 610 Data Guide
pdf
(395.31 Kb)
MasterEmaco ADH 610 Data Guide (French)
pdf
(398.94 Kb)